MASTER OF ENGINEERING IN MECHANICAL ENGINEERING
Sorted by: Author
| Call No. | Author | Title | Place of Pub. | Date |
|---|---|---|---|---|
| Ab13ir | Abad, Irene Lara Mejia | Performance comparison of diesel engine waste heat recovery devices (with and without coiled wire insert) for possible application | USC | 2019 |
| An788m | Anora, Mark Lloyd M. | Extraction of Bio-oil and Pyrolysis Gas from Marine Florae: A Possible Alternative Energy Source | USC | 2010 |
| Ar32j | Arellano, John Philip D. | Design, fabrication and testing of a Conical Solar Chimney | USC | 2012 |
| Av55ar | Avila, Arlnold E. | Variation in Conical Solar Chemney Size, Elevation and Collector Material and the Effects on Air Temperature and Velocity | USC | 2013 |
| B342g | Baygan, Gabriel Dominic R. | Coconut shell pyrolysis for optimum charcoal production | USC | 2018 |
| B838j | Brusas, Jonathan C. | Carbon Dioxide and temperature reduction of diesel exhaust using soil-based botanical biofilter | USC | 2018 |
| C111d | Cabaña, Danielle D. | Performance comparison of NACA0018 and dragonfly airfoil of a Gorlov-Hybrid helical wind turbine | USC | 2018 |
| C125aj | Caladcad, Aian Rey A. | Domestic water production using single slope solar still with designed cooling fins for remote island community | USC | 2019 |
| C360r | Chan, Richard Jess L. | Development of a Condenser for the developed Marine Florae Pyrolysis Reactor | USC | 2011 |
| C767j | Contento, Joseph Karl P. | Design, Fabrication and Testing of a Marine Current Turbine | USC | 2012 |
| D725j | Dorado, Joyeth B. | Determination of Waste Heat from exhaust of a biomass-fired periodic pottery Kiln for possible recovery | USC | 2010 |
| Es31f | Esgana, Felixberto S. Jr. | Design, fabrication and testing of a Pyrolsis reactor for Marine Florae | USC | 2011 |
| G133r | Galindo, Ronald M. | Studies on Fluidized Bed Gasification of Corncobs | University of the Philippines-Diliman | 1997 |
| G311g | Geraldino, Gromyko T. | Modeling and evaluation of a room under displacement ventilation | USC | 2012 |
| L324l | Lariosa, Louie A. | Assessment for energy conservation opportunities of Lwrence Bunzel and Philip van Engelen Buildings in the University of San Carlos-Technological Center | USC | 2018 |
| M115es | Macabutas, Estrella Callejo | Night time sky temperature variations in Puerto Princesa City and Mathematical modeling for passive roof cooling | USC | 2013 |
| M297r | Malonjao, Ray H. | Design of a one ton pineapple solid waste direct-heat countercurrent rotary dryer | USC | 2012 |
| M454j | Mayormita, Joseph T. | Development of a Desiccant modular roof for passive control of humidity n residential houses | USC | 2012 |
| N559ed | Nieves, Edzel A. | Development of a duct design simulation program | USC | 2012 |
| Ob29b | Obeso, Bryan A. | Design, Fabrication, and Testing of a Coconut Dehusker | USC | 2014 |
| Or46j | Origines, Juanito M. Jr. | Prototyping and Testing of Hydraulic Ram Pump for Possible Rural Application | USC | 2010 |
| R330j | Reyes, Jonathan N. | Passive Cooling Techniques for the improvement of the thermal environment of rooms | USC | 2007 |
| Sa551em | Sanchez, Emmanuel R. | Design of a 10-kW Francis Turbine | USC | 2011 |
| V423r | Varela, Richard J. | Design and Simulation of a Double-Skin Roof Module for a day and nighttime Natural Ventilation | USC | 2012 |
| V712j | Villanueva, Josef Vill S. | Design simulation of refrigerant piping system for split-type air conditioning system | USC | 2011 |